Best Rust Converter
Rust Converter INT
Suitable for many uses to get rid of rust and turn it into iron in 6 hours
Super easy and safe to use
No special equipment or technical skills required
Coverage per liter equals 9 square meters
An economical and fast alternative to crystallization
Does not corrode the metal surface
Gives a paint-ready surface after just 6 hours
Alexandria Governorate
If you have rust in your vehicle, refrigerator or washing machine. Any iron that has rust or bromine can be rusted back with ANT Rust Converter.
Discover more of our products
ANT Rust ConverterSuitable for many uses to get rid of rust and turn it into iron in 6 hours
Most Frequently Asked Questions (FAQs)
Dear Customer,
We at INT believe in the effectiveness of our product. If you don't get the results advertised in our advertisement, you can return the product for a full refund. We are here to ensure your complete satisfaction.
Return Policy and Terms:
Firstly, you can return the product within 14 days of purchase and the packaging is in its original condition.
Secondly : If the reaction does not occur as described in our advertisement, you can return the product and refund its value, but with conditions
* Sending a picture showing the place of rust in which the reaction did not occur with an explanation of how you used the product
* Note that the method of using the material has been clarified and no other elements such as copper, aluminum or iron mixed with the product
- After you send the required data, it will be reviewed by the technical support department and you will be answered immediately after review
We are confident that you will find our product effective. Thank you for trusting us.
A rust converter works by converting rust (the oxidation formed on the metal surface) back into iron. It restores the metal to its original color, such as gray, grayish, or black, and forms a protective, insulating layer against future rust. After using the rust converter, any protective coating or paint can be applied.
The rust remover works by removing the layer that has formed on the metal surface, but our product does the opposite... A simple example... A 4mm thick steel sheet with rust: when using a rust remover product, part of the thickness of the steel is lost, reducing it to 3mm As for our product, the rust converter does not reduce the thickness of the steel and forms a protective, insulating layer against rust.
No .. It only reacts with iron, meaning it should not be used with copper, aluminum, mixed alloys, titanium, etc.
The product does restore the color of the iron, but there are some exceptions. In some cases, the iron may be mixed with other metals, and the proportions may be higher, so the reaction occurs, but the color may change. For example, in some cases, it may turn white, and in others, it may turn black. However, in most cases, it restores the iron's original color.
Yes, you can. After 6 hours of the reaction, you can apply any type of protective coating, regardless of the kind, for long-term protection. However, the product creates an insulating layer against rust for a long period, but the exact duration cannot be determined due to the surrounding rust conditions and changing weather factors.
The product is suitable for car body panels, household appliances, iron pipes, rebar, and anything that contains iron. However, there is a small note: when using the product on car body panels or household appliance panels, most factories apply a galvanizing layer on the steel, whether it's in cars or appliances. When the product is used, it reacts with the rust and converts it, but in some cases, the rust color may remain as is. In this case, the reaction has occurred, and you can confirm this by wiping the rusted area with a tissue. If no rust appears on the tissue, the reaction has taken place. As for restoring the original color of the metal, you can apply one or two coats of paint, with 4 hours between each coat, to return the steel to its original color.
Before use, clean the rusted area with a cloth to remove any dust or dirt. Then, spray with an air gun or use a brush to evenly apply the product onto the rust. Leave it for 6 hours to allow the rust to stabilize, and the reaction will show results in less than half an hour. In cases of severe rust or pitting, spray again after 4 hours, and the process can be repeated.
The product only reacts with rust. It does not affect paints, plastics, or rubber.
The product is completely safe, but it is recommended to keep it away from children.
One liter covers 9 square meters.
It's free to order
Call back
Please fill out this form so we can
reconnect you for free!
The product is a converter and not a remover because the remover works to remove the rust layer and reduces the thickness of the iron, but the converter maintains the thickness of the iron and is an insulating layer against rust, and any paint can be used for protection for a long time and does not affect rubber or paints
Working hours
Monday - Friday | 9am - 5pm